5 pieces. knife package, Roland - Redsail Reflex film knives 50º, offset 0.75mm

5 pieces. knife package, Roland - Redsail Reflex film knives 50º, offset 0.75mm

High quality blades for reflection in reflection film

SKU: pkniv2004

Stock: 15 stk.

Delivery time:


£61 incl. VAT.
Low freight
2-4 weekdays delivery
100% secure payment 
via encrypted connection
100% satisfaction guarentee 
14 days return rights

Package contains: 5 pcs. plotter knives Plotter knives are suitable for: Stika SV-8 SV-7 SX-8 SX-12 SX-15, Camm1 CM-24 CX-24 GX-24, Roland Cammjet CJ-500 SC-500 CJ-400, Roland SolJet Pro II SC-540 SC-540 SC-545 SC-545EX, Roland Versacamm SP-300 SP-540 VP-300 VP-540, Roland Pro III XC-540, Redsail RS720C, RS800C, RS1120C, RS1360C, and many more. The knife measures 2mm in diameter and 23mm in length and is used for reflex and floc foils. General Information from Plate Production Plate Knife and Its Use Plate production plotter knives are made of cemented carbide, which makes these extra durable. In addition to this, the knives are manufactured under the best conditions to achieve the highest quality in the market and thus a high service life with a minimum of wear. It is not possible to say how long the shelf life of a plotter has, as this depends greatly on the type of foil, cutting speed and speed. Furthermore, the blades are specially designed to be used by an electronically controlled cutting plotter for cutting in different materials. However, if your plotter knife should become blurred, it is most often due to incorrect handling of the knife. This may be due to an impact knife holder. Therefore, we recommend the following advice to increase the life of your plotter knife: • You must use the different angles for the different foils. • The knife pressure and depth must be reset after changing the knife. • The knives must always be stored in the wrapper. Never loosen. • The protective cap should be inserted after use • Do not touch the knife tip with your fingers. • Always make sure that the foil is large enough for the task, otherwise the knife will cut into the protective film on the chartplotter. • The knife pressure must be set on the chartplotter (especially when cutting reflex and flap sheets). Defining knife blade slope: